Entschuldigung, Inhalt auf Englisch, wir übersetzen dieses. Produkt und bald werden Sie es in Ihrer Sprache haben.
Now available in Alchimiaweb, the Vrip Tech glass vaporizer is made in California with a really clever design thought to vaporize your cannabis buds and resins in the 42cm Dude bong , also included.
The wand will get hot by itself, transmitting the heat to the capsule that will warm the air, directing it to the bowl. The incandescent body is made ??of ceramic materials and incorporates a potentiometer, with which we can regulate the temperature.
Coating the ceramic bar it's been placed a handcrafted borosilicate glass capsule, designed to heat the air as it passes through it. As it is made ??of a neutral material, it avoids any taste interference or aftertaste.
We'll get a high quality vapor, wich will offer a wide range of flavors from our marijuana buds or hashish , allowing us to savor it deeply, receiving all its nuances.
Its design makes the air entering trough the base of the capsule, following a spiral path inside it, so that hot air coming into the bowl passes throug it as a hot air whirlwind, vaporizing the sample homogeneously and subtly.
It is advisable to start the session with the regulator at 3/4 of the range, since it is at this point that will begin to generate vapor in combination with the bowl of the included 42cm Dude Bong. This way we will get a temperature of about 175-195°C; if we want more vapor density, we just turn the regulator to get a higher temperature.
If we want to vaporize resins we should use a piece of a Volcano liquid pad to raise the sample and avoid leaking. If we shred the resin, we will get a greater vapor density.
The included 42 cm Dude bong is made ??of 3.5mm borosilicate glass, with a simple but effective design, thanks to both its 5cm in diameter and its bent neck. Some slits in the neck allow us to hold a few ice cubes to cool the vapor, enhancing its flavor. It includes a simple downstem with 18mm joint, and a carburetor hole to regulate the puffs.
To get started, we have to connect it and set it at the desired temperature, leaving it for 5-10 minutes to warm up. We fill the included bowl with weedand place it in the bong, so now we only need to place over it the tip of the VripTech glass capsule, getting a good seal between the two parts. You can use the included gasket if necessary.
It also includes a 18mm cone shaped bowl with an exit hole in which we can perfectly fit one of the steel grills included with the bong. We also have a silicone pad that can be used to leave on it the wand when it is not being used, and while it is being heated or cooled.
With VripTech, essential oils and cannabinoids gradually volatilize, prolonging the aromatic flavor for more inhalations.
Vrip Tech + bong + silicone tray Kit features:
- 1x VripTech vaporizer
- 1x Borosilicate capsule
- 1x 42cm Dude bong with 18mm bowl joint
- 1x Silicone Pad
- Steel Grids
- European plug
- Built-in temperature regulator
- It takes 5 to 10 minute to warm up properly, depending on the selected temperature
- It is recommended to leave it on the tray when not in use and to heat and cool it, preventing it from rolling and dalling down or burning the table.
