Alchimia presents here the GSE Systems Water Timer 8A irrigation controller, designed to automate the watering of your indoor cannabis crop, with an in-built light sensor for differentiating daytime and nightime watering.
This water controller is boxed in a rugged plastic case resistant to water and moisture, perfectly sealed, and compatible with flood/drain systems, droppers and NFT.
It allows to program separatelly the run time and the interval of time between each pump activation (time between waterings), setting them separately when the bulb is on and off.
To do this, it includes a light sensor with a 4m cable and four time selectors.
To install it we just have to connect the water pump to the controller and plug it to the electric current. Then place the light sensor inside the growing tent and define the desired settings.
GSE Water Timer 8A properties:
- Dimensions: 145mm x 100mm x 90mm
- Designed to work at 8A and 1800W max
- Voltage: 230v / 50Hz
- Certified IP44
- Flow of irrigation water: 1 sec to 20 min
- Irrigation Interval: 1s to 16h
