Wassertech Automatic Watering System for 10 plants

Information

The Wassertech Automatic Watering System is the perfect solution for caring for up to 10 cannabis plants efficiently and easily. Ideal for indoor or outdoor use, this system allows you to program the watering of your plants, ensuring they receive just the right amount of water, avoiding over or under watering. It's perfect for, for example, a grow tent, so you can relax in the knowledge that your grow is going ahead.

In addition, this watering system is quick to install, economical in price and works on AA batteries, so you can install it anywhere without being dependent on electricity as there is no need to connect it to the mains.

The Wassertech Automatic Watering System is simple to use. It is as easy as submerging the pump (included) in the water tank in the growing space, connecting the vinyl tubes to the plants (it includes 10 m of cuttable tubing), and programming it as you like. It has a capacity to water up to 10 plants at a time, and includes the option to regulate both the frequency and duration of watering.

The Wassertech Automatic Watering Kit for 1 plant includes:

• Programmer with 10 outlets
• Submersible pump,
• 10 stainless steel clamps
• 10 metres of vinyl tubing

Programming instructions for the Wassertech Automatic Watering System:

• The first step is to insert 4 AA batteries (LRG 1,5V) (Not included).
• Press the "power" button until the LCD display shows "day" (use the "up" or "down" buttons to adjust the watering frequency (from 0.1 to 30 days)). Example: if you want to program the unit to run 10 times a day, you will have to set the frequency to 0.1 (1/0.1=10). If, on the other hand, you want the unit to water once every two days, you will have to increase the frequency to 2 days.
• Press "Set" until the word "Sec" flashes on the display, and press "Down" to set the watering time (from 1 to 99 seconds).
• Press the "Test" button for the first watering and it will start automatically as programmed.
• If you press the "Power" button first and then press the "Test" button, the default programming will be set: the watering time of 30 seconds and the frequency of 0.1 days.