In the following video we show as the membrane for ultrasonic humidifier six-liter is changed. Very easy!!! - See more at: Changing Humidifier membrane
Changing Humidifier membrane
Transcript of video tutorial membrane humidifier 6L:
Hi everybody, this is the replacement membrane for the 6l humidifier. That I’m going to show you how to change
We’ll need a phillips screwdriver, and above all having the power cord unplugged
Let’s remove the tank from the top, and take the bottom part.
You’ll see that it has 4 screws, two on each side, those there
We’ll keep unscrewing until whe hear a “clack” sound, showing that the screw is already out
We remove the cover
We have the central lid that we need to remove too, so we can find this four screws and the electric cables
Let’s start with the screws
We need to remove those four
And now, it’s important, they are, this four, the red and black, the black… those other white four, and two more white
From here we lift that piece
We already have it out and we are going to place the new one
You’ll notice that it’s a little hard, you’ll have to press to put it in place correctly, it’s a bit hard
Let’s go screwing
…The black, the four whites and the two more whites
Once we have settled the piece, be careful with the wire order
If in the future it stops working, there is the possibility that the problem cames from the fuse, and changing it will solve the problem
So when we got it fixed, we put the security plate back
We also place well te power cord, and set the bottom lid, we screw again, and thats all
We keep screwing
And once we get it, we mount the tank back and we’re ready to go to our grow room and use it
Guys, the replacement part in Alchimiaweb.com