pH Kontrol 01 Pump

Information

Now available in Alchimia, this pH Kontrol 01 dosing pump with probe and regulator will continuously measure the pH of your nutrient solution, keeping it constant automatically.

The peristaltic pump is designed so that the pH controller liquid is transported from the tank to the solution in a controlled way and in small quantities, so that when the sensor detects a fluctuation of the acidity of the solution, this is quickly and efficiently adjusted, even if we aren't at home.

It includes an electrode sensor for pH - thaat we should submerge in the nutrient solution - inflow and outflow tubes for liquids, as well as a bracket to fix it. It does not produce noise and is IP65 certified. Only one calibration point is needed, and it measures between pH4 and 8, with a minimum of 0.1, sufficient to keep healthy your marijuana plants .

pH Kontrol 01 dosing pump installation:

• Insert the floating sensor in the tank with the nutrient solution
• Install the pump on the outside of the tank, in a fixed place
• Connect the pump with the pH- liquid container, using the suction tube
• Place the outflow tube of the pump in the tank
• Calibrate the sensor, select the limit ph and ready.

pH Kontrol 01 dosing pump features:

• Prosystem Aqua
• Kontrol pH 01
• LCD display
• Automatic proportional dosing
• Max. Pressure: 1.5 bar
• Flow rate: 40 ml/h
• Operating temperature: 0 ° c to 100 ° C
• Accuracy: ± 1%
• Current: 4 ÷ 20 mA (± 2%)
• Resolution: 0.01 pH
• PH measuring accuracy: ± 1%
• PH Regulation: pH 3-8
• One-point Calibration: pH 7
• Possibility of programming the pump to dispense both acid and base
• Power supply: 100-240V-50/60 Hz
• Protection IP 65
• Weight: 1, 8kg