The controller for grow light kits Newlite Control EXT TS1 is the best way to control the on and off switching of lamps centrally and without errors. Not only that, but it will also be possible to control the power of the lamps in those units that have a connector for external control of the unit.
Newlite Control EXT TS1, total control over grow lights
Thanks to this controller, we can also adjust a progressive switching on and off of our lighting equipment, perfectly simulating the natural sunrise and sunset, and also avoiding peaks in the electrical network. On the other hand, the power control allows us to work in a range between 0 and 115%.
In addition, it has Bluetooth connectivity, so we can configure it comfortably from our smartphone if we wish. Otherwise, we can carry out all the operations from its own interface, a practical touch screen accompanied by buttons that offer better precision for the most delicate configuration operations.
With Newlite Control EXT TS1 we can control up to 100 lamps, divided into two groups of 50 lamps each. For correct operation, the lighting equipment must have an EXT 0-10V (analog) or PWM (digital) control connector. In this way, it can be used with all types of lamps such as LEC/CMH kits, HPS or LED panels, as long as they have this control connector.
Finally, we can establish a maximum temperature so that, when it is reached inside the grow room, the lamps lower their power to the minimum that we have programmed, thus producing much less heat and allowing the temperature of the room to drop. In addition, a relative humidity value can also be set by acting on a NC/NO relay where we can connect humidifiers and dehumidifiers.
Features of Newlite Control EXT TS1
- On and off controller for grow lamps
- Lamp power regulation
- On-screen display of temperature (celsius and fahrenheit) and relative humidity
- Gradual on and off
- Bluetooth connection
- Control of up to 100 lighting fixtures