Transcript of Linx Hypnos Zero vaporizer video tutorial :
Today we’re going to see how to use the small resin vaporiser, the LINX HYPNOS ZERO.
We open the box of the Linx Hypnos Zero, the first thing to fall out is the manual, in English, very simple. There’s the body of the vaporiser, logically, and we’ve also got a USB charger and a replacement mouthpiece, that’s it.
Here we are at the table with the vaporiser, some resin and a dabber to pick it up. We’re going to see how to use this small vaporiser for resins, it’s very simple.
First of all, unscrew the upper part of the atomiser, below the mouthpiece. Here’s the atomiser, where we’re going to put the resin. Take the dabber, or any other tool to handle the resin. We’ll put a bit of resin inside and simply tighten the mouthpiece to cover it.
Now all we need to do is turn it on, but how? Pressing the central button 5 times: 1,2,3,4,5. The button will flash 5 times, which tells us that the unit is working. Here we can set the different temperatures, press it 3 times to get the temperature settings, blue is low, green is the 2nd temperature, the 3rd is yellow and red is the maximum temperature. There we are, we’ve adjusted the temperature and now by pressing the button we can start to vaporise. Press the button… and now we’re vaping.
We’ve seen that to start up the Hypnos Zero we pushed the central button 5 times. To switch it off, we do exactly the same. 1,2,3,4,5 and it flashes 5 times to show the unit is in standby mode, so we can clean it or charge the battery. How do we do that? Well, simply by unscrewing the part on the right, on my right which is the battery, the atomiser. We take the USB charger and screw it into this cylinder and we can now connect it to a normal USB port.
To clean the unit, no problem, it’s very easy because there are only 4 parts: the battery, the atomiser part where we put the resin (that’s the part I’m unscrewing), a small filter with a screen inside, and the mouthpiece. Just take an impregnated wipe, or an earbud and some isopropyl alcohol and gently and carefully remove any residues of resin stuck here. There, very easy.
This is the Linx Hypnos Zero vaporiser for resins and extractions. As you’ve seen, it’s easy, quick, versatile and above all discreet. So much so that I’m pocketing it and I’m off! Seeya soon, bye!
