Floraflex Automatic Irrigation Kit + 15 cm Pot

Information on Floraflex Automatic Irrigation Kit + 15 cm Pot

Alchimia presents the Floraflex Kit, perfect for setting up an automatic watering system in the most efficient, fast, and cost-effective manner. This kit, designed with 15cm pots, comes in two formats: for 4 and 8 plants. Simply follow the easy steps outlined below.

Steps to assemble the Floraflex Automatic Watering Kit for 4 plants:

1. Place the PotPro pots.
2. Connect the Multi Flow Bubbler to the Quick Disconnect Set, and then connect the Quick Disconnect Set to the water outlet.
3. Install the FloraCap 2.0 on the PotPro pots.
4. Attach the FloraClip 2.0 to the drip tubes.
5. Attach two tubes with FloraClip to each FloraCap.
6. Connect the other end of each tube to the Multi Flow Bubbler.
7. Adjust the flow rate according to the specific needs of the plants.

Steps to assemble the Floraflex Automatic Watering Kit for 8 plants:

1. Place the PotPro pots in the growing area.
2. Connect the Multi Flow Bubbler to the Quick Disconnect Set, and then connect the Quick Disconnect Set to the water outlet.
3. Install the FloraCap 2.0 on the PotPro pots.
4. Connect two 25cm tubes and one 120cm tube to each T-Connector.
5. Connect the other end of the 120cm tube to the Multi Flow Bubbler.
6. Attach the FloraClips 2.0 to the other end of the 25cm tubes.
7. Attach two tubes with FloraClip to each FloraCap 2.0.
8. Adjust the flow rate according to the specific needs of each plant.

Automatic Watering Kit - 15cm pot and 4 plants - components:

• 4x - 15cm PotPro Pots
• 1x - Multi Flow Bubbler
• 4x - 15cm FloraCap 2.0
• 8x - FloraClips 2.0
• 1x - Quick Disconnect Set
• 8x - 6mm tubing - 120cm piece

Automatic Watering Kit with - 15cm pot and 8 plants - componets:

• 8x - PotPro 15cm pots
• 1x - Multi Flow Bubbler
• 8x - FloraCap 2.0 15cm
• 16x - FloraClips 2.0
• 16x - Tubing 6mm - piece 25cm
• 8x - 6mm Barbed T Connector
• 1x - Quick Disconnect Set
• 8x - Tubing 6mm - piece of 120cm