Now you can automate the pH control of your nutrient tank with this Milwaukee pH controller with dosing pump, a device that efficiently stabilizes the pH value of your nutrient solution when detecting fluctuations. Now available in Alchimiaweb.
This kit consists of a MC122 continuous ph meter and a MP810 dosing pump, being very easy to install and ensuring that everything works properly in your indoor grow room even if you are not controlling it. As any grower knows, a correct pH value is needed for a proper nutrient assimilation by the plants.
We only have to place the sensor inside the tank and connect the pump to the controller through the power cable.
Connect then the pump inlet to the pH reducer and the outlet to the nutrient tank.
The dosing pump is very precise, with a very low flow, and graduates the acidity/alcalinity level of the nutrient solution.
Once everything is installed, we must set the desired pH value within a range from 5.5 to 9.5, also indicating with the button if we want to activate the pump when the pH value is below or above our setting.
It also has an alarm for those cases in which the pH value is different from the reading of the controller and there is no more pH reducer left.
Milwaukee MC720 pH controller with pump features:
- Dimensions: 148,5 x 82,5 x 32 mm
- Weight: 180gr
- Range: 0.0-14.0 pH
- Resolution: 0.1 pH
- Accuracy: +/- 0.2 pH
- pH setting: 5.5 - 9.5 pH
- Alarm in case that pH reducer tank is empty
- pH reducer flow regulation when the reading value does not correspond with our setting
- Power consumption: 230V, 117V, 8A
- Sensor model: MA911b/2