Jean-luc Petit-Bedeault 14-10-2020 Hello Alchimia! I have a small grow tent on which the holes for air intake/out take are about 150mm wide. Since the tent is very short (100cm), I wanna use the smallest carbon filter and extraction fan possible and those seems to be the ones in that pack. But the size says 100mm. So my question is, does the size of the holes really matter ? Or is size just to make sure the carbon filter and extraction fan match together ? Also, if I don't use anything on the bottom hole, just good old passive air intake... how do I make sure light is efficiently blocked there ? Muchas gracias para vuestra ayuda
Alchimia Grow Shop 19-10-2020 Hi and thaks for your comment and question. Yes, you can certainly use a smaller diameter fan or ducting in most tents, as the holes for ducting are usually fitted with inner and outer sleeves with drawstrings which enable you to pull them tight around the ducting, preventing air and light from escaping/entering. This means that you should be able to close the hole completely when it's not in use. If you want to leave it open to allow passive air intake then use a length of ducting (without a fan) to prevent the light getting into the tent. I hope that helps, all the best and happy growing!
