LEC Lumatek Tekken CMH 630w. Tutorial video

In this Alchimia videotutorial we present the new LEC Lumatek Tekken CMH 630w grow light, which in an indoor cannabis home grow space would be the equivalent of a 1000w Sodium lamp. These new Lumatek lighting systems using LEC or CMH technology have become a real revolution in cannabis cultivation, because they stand out for their quality, high performance and low consumption.

The LEC Lumatek Tekken 630w CMH comes with all the necessary components: the reflector, the 630w ballast and a double-ended bulb of the same power.

More info:

Lumatek Tekken Pro 630w LEC CMH 3100 K

Alchimia Growing Happiness

Transcript of Lumatek Tekken LEC CMH 630w videotutorial:

This is the 630w LEC/CMH Lighting Kit from the Lumatek brand. It is called TEKKEN and is the equivalent of 1000W in Sodium.

The Kit comes with 3 main elements: the reflector, the 630w ballast and a double-ended bulb of the same power. As you can see, this reflector is quite large so it is shipped disassembled. If you want later, at the end of the video, I’ll show you how it is assembled and we can all see it together…

Don’t forget that, as I’ve said, this is a double-ended bulb, it’s larger than usual, it has these holes to dissipate the heat and above all, before putting it into operation you must remove this blue plastic protective film.

The ballast provided with the Kit is specific for working with CMH or LEC bulbs. It is 630w and is dimmable from 80 to 100% of the power. It’s very simple to use, just plug it into the mains, to 220v in this case, and the output cable would connect to the reflector. In this case it comes with a Plug and Play but also with a cable to connect directly to our reflector, okay?

It also has a double Mini Jack to connect this unit with a specific controller made by Lumatek, and also allows us to connect this equipment with other ballasts, to work in series. Using the controller, via these cables, we can program the start or end of the light period, as well as the type of light and how it increases or decreases in each period.

This is the bulb that comes in the Kit, it’s 630w as we said and is double-ended. The main feature is that it is covered with a glass cylinder, which serves as protection. Well, all that’s left is to install it in the reflector…

-----

Assembling the LEC Lumatek Tekken CMH 630w reflector :

This is the breakdown of what comes in the reflector box. The instructions, this is the body and this is where the bulb holders, screws and different elements are. Let's assemble the reflector first…

Now we’re going to assemble the base for the bulb above the reflector, in this part.

We are going to put this plate between the 2 pieces, we put it in place and from below we pass the screw through…

Now all we have to do is fit the cable and close the lid.

There, now we’ve got it assembled.

(+34) 972 527 248
(+34) 972 527 248
keyboard_arrow_up Chat on Telegram